Experimental study of the phase transformation plasticity of 16MND5 low carbon steel under multiaxial loading, International Journal of Plasticity, vol.18, issue.12, pp.1707-1727, 2002. ,
DOI : 10.1016/S0749-6419(01)00067-5
URL : https://hal.archives-ouvertes.fr/hal-01006856
Experimental study of the phase transformation plasticity of??16MND5 low carbon steel induced by proportional and nonproportional biaxial loading paths, European Journal of Mechanics - A/Solids, vol.23, issue.5, pp.823-842, 2004. ,
DOI : 10.1016/j.euromechsol.2004.04.006
URL : https://hal.archives-ouvertes.fr/hal-01006855
Simulation numérique du soudage par faisceau d'électrons . Contribution au dévéloppement d'un modèle prédictif de l'apport d'énergie, 1996. ,
Stress???phase-transformation interactions ??? basic principles, modelling, and calculation of internal stresses, Materials Science and Technology, vol.200, issue.146, pp.805-814, 1985. ,
DOI : 10.1029/JB087iB08p06791
Coupled temperature, stress, phase transformation calculation, Metallurgical Transactions A, vol.35, issue.6, pp.1203-1212, 1987. ,
DOI : 10.1007/BF02647190
Influence of stresses on the kinetics of pearlitic transformation during continuous cooling, Acta Metallurgica, vol.35, issue.7, pp.1621-1632, 1987. ,
DOI : 10.1016/0001-6160(87)90109-X
Comportement mécanique et dilatométrique de l'austénite métastable de l'acier A533, 1981. ,
Micromechanical modelling of the transformation induced plasticity (TRIP) phenomenon in steels, International Journal of Engineering Science, vol.33, issue.13, pp.1921-1934, 1995. ,
DOI : 10.1016/0020-7225(95)00045-Y
A study on the metal flow in full penetration laser beam welding for titanium alloy, Computational Materials Science, vol.29, issue.4, pp.419-427, 2004. ,
DOI : 10.1016/j.commatsci.2003.11.002
Introduction to the Physical Metallurgy of Welding, Butterworths, 1983. ,
Numerical simulation of the arc pressure in gas tungsten arc welding, Journal of Materials Processing Technology, vol.61, issue.3, pp.302-308, 1996. ,
DOI : 10.1016/0924-0136(95)02190-6
Heat transfer and fluid flow in a partially or fully penetrated weld pool in gas tungsten arc welding, International Journal of Heat and Mass Transfer, vol.44, issue.2, pp.417-428, 2001. ,
DOI : 10.1016/S0017-9310(00)00094-6
Modélisation et calcul de l'évolution de la température et de la micro-structure au cours du refroidissement continu des aciers, 1985. ,
A micromechanical model for transformation plasticity in steels, Acta Metallurgica et Materialia, vol.38, issue.8, pp.1535-1546, 1990. ,
DOI : 10.1016/0956-7151(90)90121-V
Transformation-Induced Plasticity (TRIP), Applied Mechanics Reviews, vol.49, issue.6, pp.317-364, 1996. ,
DOI : 10.1115/1.3101930
URL : https://hal.archives-ouvertes.fr/hal-01113497
A new view on transformation induced plasticity (TRIP), International Journal of Plasticity, vol.16, issue.7-8, pp.723-748, 2000. ,
DOI : 10.1016/S0749-6419(99)00078-9
Etude du Comportement Mecanique associe a la Transformation Martensitique d'Alliages de Type Fe-Ni-C Sollicites en Fluage ou en Traction, 7th international conference on strengh of metal and alloys (ICSMA 7) août, pp.12-16, 1985. ,
DOI : 10.1016/B978-0-08-031642-0.50101-X
Cours de mécanique des milieux continus, 1973. ,
Effects of welding speed, energy input and heat source distribution on temperature variations in butt joint welding, Journal of Materials Processing Technology, vol.167, issue.2-3, pp.393-401, 2005. ,
DOI : 10.1016/j.jmatprotec.2005.06.018
Contraintes et déformations résiduelles d'origine thermique Application au soudage et à la trempe des aciers, Thèse de Doctorat d'Etat ès Sience Physique), 1981. ,
A new finite element model for welding heat sources, Metallurgical Transactions B, vol.23, issue.2, pp.299-305, 1984. ,
DOI : 10.1007/BF02667333
Dynamic simulation of the temperature field of stainless steel laser welding, Materials & Design, vol.28, issue.1, pp.240-245, 2007. ,
DOI : 10.1016/j.matdes.2005.06.006
The Deformation of Metals Under Small Stresses During Phase Transformations, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.283, issue.1394, pp.403-422, 1965. ,
DOI : 10.1098/rspa.1965.0029
Transformation induced plasticity in martensitic transformation of ferrous alloys, Le Journal de Physique IV, vol.11, issue.PR4, pp.173-180, 2001. ,
DOI : 10.1051/jp4:2001422
Plastic and visco-plastic materials with generalized potential, Mechanics Research Communications, vol.1, issue.1, pp.43-47, 1974. ,
DOI : 10.1016/0093-6413(74)90034-2
Weld pool dynamics and the formation of ripples in 3D gas metal arc welding, International Journal of Heat and Mass transfer, 2007. ,
Coupling between stress, temperature, and metallic structures during processes involving phase transformations, Materials Science and Technology, vol.135, issue.10, pp.845-850, 1985. ,
DOI : 10.1016/0022-5096(78)90008-X
Stresses and phase transformations occurring in quenching of carburized steel gear wheel, Materials Science and Technology, vol.22, issue.10, pp.872-876, 1985. ,
DOI : 10.1007/BF00778427
Reaction kinetics in processes of nucleation and growth, Transactions of the A.I.M.E, vol.135, pp.416-458, 1939. ,
Combined heat and stress-strain calculations. Modeling of casting, welding and advances solidification Processes V, pp.187-202, 1991. ,
Heat and fluid flow in pulsed current GTA weld pool, International Journal of Heat and Mass Transfert, vol.41, pp.3213-3227, 1998. ,
A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels, Acta Metallurgica, vol.7, issue.1, pp.59-60, 1959. ,
DOI : 10.1016/0001-6160(59)90170-1
Mathematical modelling of transformation plasticity in steels II: Coupling with strain hardening phenomena, International Journal of Plasticity, vol.5, issue.6, pp.573-591, 1989. ,
DOI : 10.1016/0749-6419(89)90002-8
A new kinetic model for anisothermal metallurgical transformations in steels including effect of austenite grain size, Acta Metallurgica, vol.32, issue.1, pp.137-146, 1984. ,
DOI : 10.1016/0001-6160(84)90211-6
A theoretical and numerical approach to the plastic behaviour of steels during phase transformations???I. Derivation of general relations, Journal of the Mechanics and Physics of Solids, vol.34, issue.4, pp.395-409, 1986. ,
DOI : 10.1016/0022-5096(86)90009-8
A theoretical and numerical approach to the plastic behaviour of steels during phase transformations???II. Study of classical plasticity for ideal-plastic phases, Journal of the Mechanics and Physics of Solids, vol.34, issue.4, pp.411-432, 1986. ,
DOI : 10.1016/0022-5096(86)90010-4
Mathematical modelling of transformation plasticity in steels I: Case of ideal-plastic phases, International Journal of Plasticity, vol.5, issue.6, pp.551-572, 1989. ,
DOI : 10.1016/0749-6419(89)90001-6
Mécanique des matériaux solides, 1996. ,
Analysis of the transport phenomena in the interfacial region between TIG arcs and weld pools, Computational Materials Science, vol.8, pp.243-350, 1997. ,
Numerical simulation on interaction between TIG welding arc and weld pool, Computational Materials Science, vol.35, issue.4, pp.458-465, 2006. ,
DOI : 10.1016/j.commatsci.2005.03.014
Transformation kinetics, microplasticity and aging of martensite in Fe31Ni, 1966. ,
Simulation of temperature fields in arc and beam welding, Heat and Mass Transfer, vol.36, issue.2, pp.117-126, 2000. ,
DOI : 10.1007/s002310050373
The relationship between transformation at constant temperature and transformation during cooling, Trans. A.I.M.E, vol.167, pp.442-466, 1946. ,
Jonction 16MND5-INCONEL 690-316LN par soudage diffusion. Elaboration et calculs des contraintes résiduelles de procédé, 1999. ,
Sur la modélisation du changement de phase à l'état solide, 1995. ,
Theoretical and numerical modeling of solid???solid phase change: Application to the description of the thermomechanical behavior of shape memory alloys, International Journal of Plasticity, vol.24, issue.4, pp.614-645, 2008. ,
DOI : 10.1016/j.ijplas.2007.07.007
Modélisation théorique et calcul numérique du changement de phase dans les solides, Revue Européenne de Eléments Finis, vol.7, pp.8-8, 1998. ,
Conséquences mécaniques des transformations structurales dans les alliages ferreux, 2000. ,
Experimental results on classical plasticity of steels subjected to structural transformations, International Journal of Plasticity, vol.20, issue.8-9, pp.1371-1386, 2004. ,
DOI : 10.1016/j.ijplas.2003.07.003
Modélisation élasto-(visco)plastique prenant en compte de transformations structurales, 2002. ,
Etude et modélisation de la formation d'un cordon de soudure à l'arc, 2000. ,
Analysis of magnetohydrodynamics GTAW arc behavior, Proceedings of the COMSOL Multiphysics User's Conference, 2005. ,
Effet des sollicitations thermom??caniques sur les transformations de phases dans l'??tat solide. Aspects m??tallurgique et m??canique, Le Journal de Physique IV, vol.04, issue.C3, 1994. ,
DOI : 10.1051/jp4:1994328
New investigations on transformation induced plasticity and its interaction with classical plasticity, International Journal of Plasticity, vol.22, issue.1, pp.110-130, 2006. ,
DOI : 10.1016/j.ijplas.2005.03.012
A micromechanical modeling of the Greenwood???Johnson mechanism in transformation induced plasticity, International Journal of Plasticity, vol.19, issue.10, pp.1821-1842, 2003. ,
DOI : 10.1016/S0749-6419(03)00020-2
Experimental analysis of transformation plasticity, International Journal of Plasticity, vol.17, issue.1, pp.1-20, 2001. ,
DOI : 10.1016/S0749-6419(99)00090-X
Finite element modeling of electron beam welding of a large complex Al alloy structure by parallel computations, Journal of Materials Processing Technology, 2007. ,
DOI : 10.1016/j.jmatprotec.2007.07.045
Mod??lisation des effets m??caniques des transformations de phases pour le calcul de structures, Le Journal de Physique IV, vol.04, issue.C3, pp.227-231, 1994. ,
DOI : 10.1051/jp4:1994331
Experimental Study of the Transformation-Induced Plasticity in a Cr-Ni-Mo-Al-Ti Steel, Le Journal de Physique IV, vol.06, issue.C1, pp.465-474, 1996. ,
DOI : 10.1051/jp4:1996145
URL : https://hal.archives-ouvertes.fr/jpa-00254177