«. Electricité, Production et distribution », étude Xerfi, 1999.

K. K. Chawla and . Chap, Metal matrix composites, Composite Materials : Sc. And Eng, pp.164-211, 1998.

T. W. Clyne and P. J. Withers, « General introduction », dans « An introduction to Metal Matrix Composites », Cambridge Solid State Science Series, pp.1-10, 1993.

«. Coprem, Continuous processing of endless fibre-reinforced metal wires », projet européen Brite-EuRam n° BE97-4643, programme du projet et les différents rapports édités au cours des trois ans, 1998.

X. Duan, Method of an Apparatus for Microwave-Plasma Production, 1999.

H. E. Deve and C. Mc-cullough, « Continuous fiber reinforced Al composites : a new generation, JOM, n° Juillet, pp.33-37, 1995.
DOI : 10.1007/bf03221227

Y. Yasutomi, J. Sawada, T. Kikuchi, K. Nakamura, Y. Manabe et al., Influences of Feimpurity on the production process of SiC fiber reinforced Al for electric cables, J. of Mat

F. Delannay, L. Froyen, and A. Deruyttere, The wetting of solids by molten metals and its relation to the preparation of metal-matrix composites composites, Journal of Materials Science, vol.19, issue.c8, pp.1-16, 1987.
DOI : 10.1007/BF01160545

N. Eustathopoulos, J. C. Joud, P. Desre, and J. M. Hicter, The wetting of carbon by aluminium and aluminium alloys, Journal of Materials Science, vol.62, issue.10, pp.1233-1242, 1974.
DOI : 10.1007/BF00551836

K. Landry, S. Kalogeropoulou, N. Eustathopoulos, and . Wettabiblity, Wettability of carbon by aluminum and aluminum alloys, Materials Science and Engineering: A, vol.254, issue.1-2, pp.99-111, 1998.
DOI : 10.1016/S0921-5093(98)00759-X

V. Laurent, D. Chatain, C. Chatillon, and N. Eustathopoulos, « Wettability of monocrystalline alumina by aliminium between its melting point and 1273 K », Acta Metall, vol.36, pp.71797-1803, 1988.

B. J. Keene, Review of data for the surface tension of pure metals, International Materials Reviews, vol.55, issue.4, pp.157-192, 1993.
DOI : 10.1016/0022-1902(65)80192-0

H. Fujii, Application of wetting research to joining and to fabrication of composite materials, Sc. and Tech. of Welding and Joining, pp.4187-193, 1999.
DOI : 10.1179/136217199101537743

A. Mortensen and . Chap, Melt Infiltration of Metal Matrix Composites, dans « Comprehensive Composite Materials Metal Matrix Composites, pp.521-539, 2000.
DOI : 10.1016/B0-08-042993-9/00019-X

A. Mortensen and J. A. Cornie, On the infiltration of metal matrix composites, Metallurgical and Materials Transactions A, vol.2, issue.7, 1986.
DOI : 10.1002/9780470291092.ch27

M. F. Amateau, Progress in the Development of Graphite- Aluminum Composites Using Liquid Infiltration Technology, Journal of Composite Materials, vol.10, issue.4, p.279, 1976.
DOI : 10.1177/002199837601000402

S. W. Ip, R. Sridhar, J. M. Toguri, T. F. Stephenson, and A. E. Warner, Wettability of nickel coated graphite by aluminum, Wettability of nickel coated graphite by aluminium, pp.31-38, 1998.
DOI : 10.1016/S0921-5093(97)00823-X

H. Fujii, H. Nakae, and K. Okada, « Interfacial reaction wetting in the boron nitride/molten aluminium system, Acta Metall. Mater, vol.41, pp.102963-2971, 1993.

V. Laurent, D. Chatain, and N. Eustathopoulos, Wettability of SiO2 and oxidized SiC by aluminium, Materials Science and Engineering: A, vol.135, pp.89-94, 1991.
DOI : 10.1016/0921-5093(91)90542-U

S. K. Rhee, Wetting of ceramics by liquid aluminium, J. The Am. Soc, vol.53, 1970.

J. P. Rocher, J. M. Quenisset, R. Naslain, and R. Pailler, « Process for making composite materials consisting of a first reinforcing component combined with a second component consisting of a light alloy and products obtained by this process, 1987.

J. P. Rocher, J. M. Quenisset, and R. Naslain, Wetting improvement of carbon or silicon carbide by aluminium alloys based on a K2ZrF6 surface treatment: application to composite material casting, Journal of Materials Science, vol.2, issue.8, pp.2697-2703, 1989.
DOI : 10.1007/BF02385613

L. H. Peebles, Carbon fibres: Structure and mechanical properties, International Materials Reviews, vol.294, issue.2, p.75, 1994.
DOI : 10.1177/002199838702100106

M. H. Vidal-sétif, M. Lancin, C. Marhic, R. Valle, J. Raviart et al., On the role of brittle interfacial phases on the mechanical properties of carbon fibre reinforced Al-based matrix composites, Materials Science and Engineering: A, vol.272, issue.2, pp.321-333, 1999.
DOI : 10.1016/S0921-5093(99)00487-6

E. Pippel, J. Woltersdorf, M. Doktor, J. Blucher, and H. P. Degisher, « Interlayer structure of carbon fibre reinforced aluminium wire [35] I.H.Khan, « The effect of thermal exposure on the mechanical properties of aluminium-graphite composites, J. Mat. Sc. Metall. Trans. A, vol.357, pp.2279-22891281, 1976.

J. Pelleg, D. Ashkenazi, and M. Ganor, The influence of a third element on the interface reactions in metal???matrix composites (MMC): Al???graphite system, Materials Science and Engineering: A, vol.281, issue.1-2, pp.239-247, 2000.
DOI : 10.1016/S0921-5093(99)00718-2

A. Okura and K. Motoki, Rate of formation of intermetallic compounds in aluminium matrix-carbon fibre composites, Composites Science and Technology, vol.24, issue.4, pp.243-252, 1985.
DOI : 10.1016/0266-3538(85)90024-7

S. Kohara and N. Muto, « Degradation of carbon fibers in molten aluminium », dans ECCM 1, 1985.

T. Suzuki, The compatibility of pitch-based carbon fibers with aluminum for the improvement of aluminum-matrix composites, Composites Science and Technology, vol.56, issue.2, pp.147-153, 1996.
DOI : 10.1016/0266-3538(95)00138-7

H. P. Degischer, P. Schulz, W. Lacom, and J. Langgartner, « Properties of continuous carbon fibre reinforced aluminium depending on the infiltration process and local fibre variations, 3rd International Symposium on Structural and Functional Gradient Materials, Lausanne, Proceedings, Ed. B.Ilschner & N.Cherradi, p.1994

B. Maruyama and L. Rabenberg, « Oxidation model of interface reactions in aluminium/graphite composites », dans Interfaces in MMC, 1986.

R. S. Bushby, Evaluation of Continuous Alumina Fiber Reinforced Composites Based upon Pure Aluminum, Mat. Sc. and Tech, vol.14, pp.9-10877, 1998.

C. Hausmann, O. Beffort, S. Long, and C. , Cayron, « About the compatibility of various Al and Mg fiber systems manufactured by means of squeeze casting, Verbundwerkstoffe and Werkstoffverbunde, Proceedings, 1999.

J. Pora, P. L. Vacon, and M. Rabinovitch, Elaboration and Evaluation of Carbon Fiber Aluminum Composites for Aerospace Applications, Proceedings of ICAA-6, pp.1867-1872, 1998.

J. Pora, P. Le-vacon, C. Carre, P. Santini, C. Schneider et al., « Gas pressure infiltration processing and mechanical properties of alumina and carbon fibers reinforced aluminium alloys, Proceedings of ICCM-10 Metal matrix composites, 1995.

I. Hall and V. Barrailler, « Interfacial reactions in metal matrix composites », dans ECCM 1, 1985.

J. Bouix, M. P. Berthet, F. Bosselet, R. Favre, M. Peronnet et al., Interface Tailoring in Carbon Fibres Reinforced Metal Matrix Composites, Le Journal de Physique IV, vol.07, issue.C6, p.6, 1997.
DOI : 10.1051/jp4:1997616

URL : https://hal.archives-ouvertes.fr/jpa-00255715

Y. Q. Wang and B. L. Zhou, Behaviour of coatings on reinforcements in some metal matrix composites, Composites Part A: Applied Science and Manufacturing, vol.27, issue.12, pp.1139-1145, 1996.
DOI : 10.1016/1359-835X(96)00072-3

S. Pelletier, Elaboration et caractérisation de composites C-Al : infiltration de mèches de fibres traitées, 1994.

R. M. Andrews and A. Mortensen, « Lorentz force driven infiltration by aluminium, Innovative Composite Processing Proceedings ASM/TMS Conference, 1990.

A. Mortensen, R. M. Andrews, and M. C. , Flemings, « Method for producing metal matrix composites using electromagnetic body forces, 1998.

H. M. Cheng, Z. H. Lin, B. L. Zhou, Z. G. Zhen, K. Kobayashi et al., Preparation of carbon fibre reinforced aluminium via ultrasonic liquid infiltration technique, Materials Science and Technology, vol.9, issue.7, p.609, 1993.
DOI : 10.1016/0956-716X(91)90334-W

J. Pan, C. Li, D. M. Yang, and X. F. Yin, « A study about mechanism of ultrasonic liquid infiltration for SiCx, ICCM-9, MMC, 1993.

H. Nakanishi, Y. Tsunekawa, M. Okumiya, and N. Mohri, Ultrasound-assisted pressureless infiltration of molten aluminium into alumina capillaries, Journal of Materials Science Letters, vol.50, issue.16, pp.1313-1315, 1993.
DOI : 10.1007/BF00506348

T. Hatakeyama and F. X. Quinn, Thermal Analysis, 1999.
DOI : 10.1007/978-3-642-74065-7_14

E. G. Jones, D. L. Pedrick, and I. J. Goldfarb, Application of thermogravimetric-mass spectroscopy analysis for polymer characterization, Polymer Engineering and Science, vol.54, issue.16, pp.161046-1051, 1988.
DOI : 10.1002/pen.760281606

L. H. Peebles, Carbon fibres: Structure and mechanical properties, International Materials Reviews, vol.294, issue.2, p.75, 1994.
DOI : 10.1177/002199838702100106

. M. El, J. B. Asloun, G. Donnet, M. Guilpain, J. Nardin et al., « On the estimation of tensile strength of carbon fibers at short lengths, Journal of Materials Science, vol.24, pp.3504-3510, 1989.

B. Roebuck, T. A. Gorley, and L. N. Mccatney, Mechanical property test procedures for metal matrix composites, Materials Science and Technology, vol.16, issue.3, pp.105-117, 1989.
DOI : 10.1098/rspa.1957.0133

A. Oberlin and M. Guigon, « The strucutre of carbon fibers », dans : « Fiber reinforcements for composites materials, A.R.Bunsell, pp.149-210, 1988.

J. B. Donnet and R. C. Bansal, Preparation of carbon fibers » et « Structure of carbon fibers », dans « Carbon fibers » 2 nd Edition, Lewin, International Fiber Science and Technology Series, pp.55-83, 1990.

T. A. Utigard, K. Friesen, R. R. Roy, J. Lim, A. Silny et al., The properties and uses of fluxes in molten aluminum processing, JOM, vol.47, issue.12, pp.38-43, 1998.
DOI : 10.1007/s11837-998-0285-7

S. Pelletier, Elaboration et caractérisation de composites C-Al : infiltration de mèches de fibres traitées, 1994.

S. Schamm, J. P. Rocher, and R. , Naslain, « Physicochemical aspects of K 2 ZrF 6 process allowing the spontaneous infiltration of SiC (or C) preforms by liquid aluminium, J. of Mat. Sc., ECCM-3, 1989.

S. Schamm, Sur l'élaboration des composites SiC/Al par le procédé au K 2 ZrF 6 ? Bases physico-chimiques et incidence sur la résistance des fibres », thèse de l'université de Bordeaux I, 1989.

J. P. Rocher, J. M. Quenisset, and R. Naslain, Wetting improvement of carbon or silicon carbide by aluminium alloys based on a K2ZrF6 surface treatment: application to composite material casting, Journal of Materials Science, vol.2, issue.8, pp.2697-2703, 1989.
DOI : 10.1007/BF02385613

E. M. Levin, C. R. Robbins, and H. F. Mcmurdie, The Amer, Phase Diagrams for Ceramists, p.419419, 1964.

M. S. Lee, B. S. Terry, and P. Grieveson, « Thermodynamic properties of alkali metal fluoridealuminium fluoride melts, Trans. Instn Min. Metall, vol.103, pp.33-40, 1994.

. Acad and . Sci, Paris, t.313, Série II, pp.891-894, 1991.

T. Nishino, H. Naito, K. Nakamura, and K. , X-ray diffraction studies on the stress transfer of transversely loaded carbon fibre reinforced composite, Composites Part A: Applied Science and Manufacturing, vol.31, issue.11, pp.1225-1230, 2000.
DOI : 10.1016/S1359-835X(00)00084-1

T. Hatakeyama, F. X. Quinn, and . Thermogravimetry, dans « Thermal analysis : fundamentals and applications to polymer science, p.45, 1999.

R. J. Morgan, « Thermal characterization of composites ? Fibers », dans « Thermal characterization of polymeric materials, p.2166, 1997.

E. Duvivier, « Cinétique d'oxydation d'un composite C/C et influence sur le comportement mécanique », thèse de l, p.1692, 1997.

V. P. Zakordonskiy, S. Y. Hnatyshin, and M. M. Soltys, « Thermal degradation of epoxy polymers. Method of the evaluation of kinetic parameters on the base of thermogravimetric data », Polish J. Chem, vol.72, pp.2610-2620, 1998.

K. G. Raemaekers and J. C. Bart, Applications of simultaneous thermogravimetry-mass spectrometry in polymer analysis, Thermochimica Acta, vol.295, issue.1-2, pp.1-58, 1997.
DOI : 10.1016/S0040-6031(97)00097-X

H. E. Kissinger, Reaction Kinetics in Differential Thermal Analysis, Analytical Chemistry, vol.29, issue.11, pp.1702-1706, 1957.
DOI : 10.1021/ac60131a045

N. Rose, M. L. Bras, S. Bourbigot, and R. , Thermal oxidative degradation of epoxy resins: evaluation of their heat resistance using invariant kinetic parameters, Polymer Degradation and Stability, vol.45, issue.3, pp.387-397, 1994.
DOI : 10.1016/0141-3910(94)90209-7

R. H. Patel, V. S. Patel, and R. G. Patel, Effect of different epoxy diluents/fortifier on the reactivity in curing and the thermal stability of epoxy resin using 2,2-bis[4-(p-aminophenoxy)phenyl]-propane as a curing agent, Thermochimica Acta, vol.141, pp.77-86, 1989.
DOI : 10.1016/0040-6031(89)87043-1

L. Barral, J. Cano, J. Lopez, I. Lopez-bueno, C. Ramirez et al., Abad, « Degradation kinetics of an epoxy / cycloaliphatic amine resin under isothermal and non-isothermal conditions, Journal of Thermal Analysis and Calorimetry, vol.55, issue.1, pp.37-45, 1999.
DOI : 10.1023/A:1010115618176

X. Buch, « Dégradation thermique et fluage d'un adhésif structural epoxyde, 2000.

J. M. Criado, J. Malek, and A. Ortega, Applicability of the master plots in kinetic analysis of non-isothermal data, Thermochimica Acta, vol.147, issue.2, pp.377-385, 1989.
DOI : 10.1016/0040-6031(89)85192-5

H. H. Horowitz and G. Metzger, A New Analysis of Thermogravimetric Traces., Analytical Chemistry, vol.35, issue.10, pp.1464-1468, 1963.
DOI : 10.1021/ac60203a013

J. P. Rocher, J. M. Quenisset, R. Naslain, and R. Pailler, « Process for making composite materials consisting of a first reinforcing component combined with a second component consisting of a light alloy and products obtained by this process, 1987.

S. Pelletier, Elaboration et caractérisation de composites C-Al : infiltration de mèches de fibres traitées, 1994.

H. Lundin, « Process for coating and uniting metal shapes with aluminium, 1954.

S. Schamm, Sur l'élaboration des composites SiC/Al par le procédé au K 2 ZrF 6 -Bases physico-chimiques et incidence sur la résistance des fibres, 1989.

D. W. Green, Perry's Chemical Engineers' Handbook, 6 th Edition Section 19 « Liquid-solid systems, pp.24-26, 1984.

J. P. Jolivet, « Condensation et précipitation en solution aqueuse » dans « De la solution à l'oxyde », CNRS Editions, 1994.

P. Bayard, « Rechargement par brasage-diffusion ? Etude des mécanisme mis en jeu dans la fabrication des préformes préfrittés, 1997.

S. Schamm, J. P. Rocher, and R. , Naslain, « Physicochemical aspects of K 2 ZrF 6 process allowing the spontaneous infiltration of SiC (or C) preforms by liquid aluminium, J. of Mat. Sc., ECCM-3, 1989.

W. Lu, X. Fu, and D. D. Chung, A comparative study of the wettability of steel, carbon, and polyethylene fibers by water, Cement and Concrete Research, vol.28, issue.6, pp.6783-786, 1998.
DOI : 10.1016/S0008-8846(98)00056-8

J. Chappuis and J. M. Georges, « Contribution à l'étude du mouillage, analyse d'une méthode de mesure, J. de Chimie Physique, vol.71, issue.4, pp.567-575, 1974.

A. Mortensen, Interfacial phenomena in the solidification processing of metal matrix composites, Materials Science and Engineering: A, vol.135, pp.1-11, 1991.
DOI : 10.1016/0921-5093(91)90527-T

M. N. Gungor, J. A. Cornie, and M. C. Flemings, « Solidification processing of an aluminium/alumina composite », Conference Cast Reinforced Metal Composites, pp.39-45, 1988.

M. Lancin and C. , TEM study of carbon fibre reinforced aluminium matrix composites: influence of brittle phases and interface on mechanical properties, Journal of the European Ceramic Society, vol.20, issue.10, pp.1493-1503, 2000.
DOI : 10.1016/S0955-2219(00)00021-2

X. Chen, G. Zhen, and Z. Shen, « A TEM study of the interfaces and matrices of SiC-coated carbon fibre/aluminium composites made by the K 2 ZrF 6 process, J. Mat. Sc, vol.31, pp.42978-4302, 1996.

F. Boland, Maîtrise des réactions interfaciales au cours de l'élaboration par forgeage liquide de composites à matrice d'aluminium renforcée par des fibres métalliques à base Fe et à base Ni, 1996.

C. Salmon, Influence of processing conditions on the properties of aluminium matrix composites reinforced with metallic fibres », thèse de l, 2000.

F. Delannay and . Chap, 13 : Thermal stresses and thermal expansion in MMCs, Comprehensive Composite Materials Metal Matrix Composites, pp.717-739, 2000.

T. W. Clyne and P. J. Withers, « Thermal effects and high temperature behaviour », dans « An introduction to Metal Matrix Composites », Cambridge Solid State Science Series, pp.120-123, 1993.

H. M. Cheng, S. Akiyama, A. Kitahara, K. Kobayashi, and B. L. Zhou, The tensile strength and fiber degradation of carbon fiber reinforced aluminium composites, Scripta Metallurgica et Materialia, vol.25, issue.8, pp.1951-1956, 1991.
DOI : 10.1016/0956-716X(91)90334-W

S. Schamm, Sur l'élaboration des composites SiC/Al par le procédé au K 2 ZrF 6 -Bases physico-chimiques et incidence sur la résistance des fibres, 1989.

B. Roebuck, T. A. Gorley, and L. N. Mccartney, Mechanical property test procedures for metal matrix composites, Materials Science and Technology, vol.16, issue.3, pp.105-117, 1989.
DOI : 10.1098/rspa.1957.0133

S. Pelletier, Elaboration et caractérisation de composites C-Al : infiltration de mèches de fibres traitées », thèse de l'Ecole des Mines de Paris [16] N.Bhillig, « Effect of fiber misalignment on the fracture behaviour of fiber-reinforced composites, J. Mat. Sc, vol.29, pp.419-423, 1994.

X. B. Zhou, J. M. Th, and . De-hosson, Reactive wetting of liquid metals on ceramic substrates, Acta Materialia, vol.44, issue.2, pp.421-426, 1996.
DOI : 10.1016/1359-6454(95)00235-9

M. Yan, Z. Fan, and . Review, durability of materials in molten aluminium alloys, Journal of Materials Science, vol.36, issue.2, pp.285-295, 2001.
DOI : 10.1023/A:1004843621542

E. Pippel, J. Woltersdorf, M. Doktor, J. Blucher, and H. P. Degisher, « Interlayer structure of carbon fibre reinforced aluminium wire »», Journal of Materials Science, vol.35, issue.9, pp.2279-2289, 2000.
DOI : 10.1023/A:1004787112162