-. S. Vernier, J. M. Franchet, A. L. Rouffié, C. Dumont, N. Bozzolo-;-poster et al., A mechanism leading to ? precipitates with {111} facets and unusual orientation relationships to the matrix in ?-? nickel-based superalloys, Analyse quantitative des hétérogénéités de microstructure dans des billettes de superalliage base nickel AD730 TM , La Métallurgie : Quel avenir ! , conférence organisée par la SF2M, vol.27, pp.492-503, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01822400

J. M. Vernier, C. Franchet, P. Dumont, and N. Vennéguès, Bozzolo, ? precipitates with a twin orientation relationship to their hosting grain in a ?-? nickel-based superalloy, Scripta Materialia, vol.153, pp.10-13, 2018.

J. M. Vernier, C. Franchet, N. Dumont, and . Bozzolo, A mechanism leading to ? precipitates with {111} facets and unusual orientation relationships to the matrix in ?-? nickel-based superalloys, Metallurgical and Materials Transactions A, vol.49, issue.9, pp.4308-4323, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01822400

T. M. Pollock and S. Tin, Nickel-Based Superalloys for Advanced Turbine Engines : Chemistry, Microstructure and Properties, Journal of Propulsion and Power, vol.22, issue.2, pp.361-374, 2006.
DOI : 10.2514/1.18239

URL : http://deepblue.lib.umich.edu/bitstream/handle/2027.42/77223/AIAA-18239-462.pdf?sequence=1

L. Thébaud, Etude des relations entre microstructure et propriétés mécaniques du nouveau superalliage base nickel AD730 TM, 2017.

R. E. Schafrik, D. D. Ward, and J. R. Groh, Application of Alloy 718 in GE Aircraft Engines : Past, Present and Next Five Years, Superalloys 718, 625, 706 and Various Derivatives, pp.1-11, 2001.

, University of Cambridge, Department of Engineering

A. Devaux, B. Picqué, M. F. Gervais, E. Georges, T. Poulain et al., AD730 TM -A New Nickel-Based Superalloy for High Temperature Engine Rotative Parts, pp.911-919, 2012.
DOI : 10.7449/2012/superalloys_2012_911_919

URL : https://doi.org/10.7449/2012/superalloys_2012_911_919

R. M. Forbes-jones and L. A. Jackman, The structural evolution of superalloy ingots during hot working, JOM, vol.51, pp.27-31, 1999.

C. Crozet, A. Devaux, R. Forestier, S. Charmond, M. Hueller et al., Effect of Ingot Size on Microstructure and Properties of the New Advanced AD730 TM Superalloy, pp.437-446, 2016.

R. S. Minisandram, L. A. Jackman, J. L. Russell, M. L. Lasonde, J. A. Heaney et al., Recrystallization Response during Thermo-Mechanical Processing of Alloy Rene 65
DOI : 10.7449/2014/superalloys_2014_95_105

URL : https://doi.org/10.7449/2014/superalloys_2014_95_105

, 8th International Symposium on Superalloy 718 and Derivatives, pp.95-105, 2014.

L. Thébaud, P. Villechaise, C. Crozet, A. Devaux, D. Béchet et al., Is there an optimal grain size for creep resistance in Ni-based disk superalloys ?, Materials Science and Engineering : A, vol.716, pp.274-283, 2018.

B. J. Bond, C. M. O'brien, J. L. Russell, J. A. Heaney, and M. L. Lasonde, René 65 Billet Material for Forged Turbine Components, 8th International Symposium on Superalloy 718 and Derivatives, pp.107-118, 2014.

P. L. Baillif, P. Lamesle, D. Delagnes, V. Velay, C. Dumont et al., Influence of the quenching rate and step-wise cooling temperatures on microstructural and tensile properties of PER72 R Ni-based superalloy, MATEC Web of Conferences, vol.14, p.21002, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01611618

R. A. Ricks, A. J. Porter, and R. C. Ecob, The growth of ?' precipitates in nickel-base superalloys, Acta Metallurgica, vol.31, issue.1, pp.43-53, 1983.

R. Sowa, S. Arabasz, and M. Parlinska-wojtan, Classification and microstructural stability of high generation single crystal Nickel-based superalloys, Zastita materijala, vol.57, issue.2, pp.274-281, 2016.

T. Grosdidier, A. Hazotte, and A. Simon, Precipitation and dissolution processes in ?/?' single crystal nickel-based superalloys, Materials Science and Engineering : A, vol.256, issue.1, pp.183-196, 1998.

X. Li, N. Saunders, and A. Miodownik, The coasening kinetics of ?' particles in Nickel-based alloys, 2002.

D. L. Olmsted, S. M. Foiles, and E. A. Holm, Survey of computed grain boundary properties in face-centered cubic metals : I. Grain boundary energy, Acta Materialia, vol.57, pp.3694-3703, 2009.

F. C. Campbell, Elements of Metallurgy and Engineering alloys, 2008.

F. Masoumi, M. Jahazi, D. Shahriari, and J. Cormier, Coarsening and dissolution of ?' precipitates during solution treatment of AD730 TM Ni-based superalloy : Mechanisms and kinetics models, Journal of Alloys and Compounds, vol.658, pp.981-995, 2016.

M. J. Donachie and S. J. Donachie, Superalloys : A Technical Guide, 2002.

L. Priester, Grain Boundaries and Crystalline Plasticity, 2011.

H. Montcel, Ingénierie des joints de grains dans les superalliages à base de nickel, MINES ParisTech -PSL, 2012.

D. G. Brandon, The structure of high-angle grain boundaries, Acta Metallurgica, vol.14, pp.1479-1484, 1966.

J. Humphreys, G. S. Rohrer, and A. Rollett, Recrystallization and Related Annealing Phenomena, 2017.

D. A. Porter and K. E. Easterling, Phase Transformations in Metals and Alloys, 1992.

J. Genée, L. Signor, and P. Villechaise, Slip transfer across grain/twin boundaries in polycrystalline Ni-based superalloys, Materials Science and Engineering A, vol.701, pp.24-33, 2017.

J. Miao, T. M. Pollock, and J. W. Jones, Crystallographic fatigue crack initiation in nickelbased superalloy René 88DT at elevated temperature, Acta Materialia, vol.57, issue.20, pp.5964-5974, 2009.

J. C. Stinville, N. Vanderesse, F. Bridier, P. Bocher, and T. M. Pollock, High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy, Acta Materialia, vol.98, pp.29-42, 2015.

J. C. Stinville, W. C. Lenthe, J. Miao, and T. M. Pollock, A combined grain scale elastic-plastic criterion for identification of fatigue crack initiation sites in a twin containing polycrystalline nickel-base superalloy, Acta Materialia, vol.103, pp.461-473, 2016.

U. Krupp, Improving the resistance to intergranular cracking and corrosion at elevated temperatures by grain-boundary-engineering-type processing, Journal of Materials Science, vol.43, issue.11, pp.3908-3916, 2008.
DOI : 10.1007/s10853-007-2363-6

M. Kumar, A. J. Schwartz, and W. E. King, Microstructural evolution during grain boundary engineering of low to medium stacking fault energy fcc materials, Acta Materialia, vol.50, pp.2599-2612, 2002.

E. Nes, N. Ryum, and O. Hunderi, On the Zener drag, Acta Metallurgica, vol.33, pp.11-22, 1985.
DOI : 10.1016/0001-6160(85)90214-7

P. A. Manohar, M. Ferry, and T. Chandra, Five Decades of the Zener Equation, ISIJ International, vol.38, issue.9, pp.913-924, 1998.

S. P. Ringer, W. B. Li, and K. E. Easterling, On the interaction and pinning of grain boundaries by cubic shaped precipitate particles, Acta Metallurgica, vol.37, issue.3, pp.831-841, 1989.

Y. Huang, F. J. Humphreys, and M. Ferry, The annealing behaviour of deformed cube-oriented aluminium single crystals, Acta Materialia, vol.48, pp.2543-2556, 2000.
DOI : 10.1016/s1359-6454(00)00068-9

Y. Huang and F. J. Humphreys, Subgrain growth and low angle boundary mobility in aluminium crystals of orientation {110}<001>, Acta Materialia, vol.48, pp.2017-2030, 2000.

G. E. Lloyd, Atomic number and crystallographic contrast images with the SEM : a review of backscattered electron techniques, Mineralogical Magazine, vol.51, pp.3-19, 1987.

F. J. Humphreys, Review : Grain and subgrain characterization by electron backscatter diffraction, Journal of Materials Science, vol.36, issue.16, pp.3833-3854, 2001.

P. W. Trimby, Orientation mapping of nanostructured materials using transmission Kikuchi diffraction in the scanning electron microscope, Ultramicroscopy, vol.120, pp.16-24, 2012.

E. Brodu and E. Bouzy, Depth Resolution Dependence on Sample Thickness and Incident Energy in On-Axis Transmission Kikuchi Diffraction in Scanning Electron Microscope (SEM), Microscopy and Microanalysis, vol.23, pp.1096-1106, 2017.

R. R. Keller and R. H. Geiss, Transmission EBSD from 10 nm domains in a scanning electron microscope, Journal of Microscopy, vol.245, issue.3, pp.245-251, 2012.

F. Bachmann, R. Hielscher, and H. Schaeben, Grain detection from 2d and 3d EBSD data-Specification of the MTEX algorithm, Ultramicroscopy, vol.111, pp.1720-1733, 2011.

G. Nolze and R. Hielscher, Orientations -Perfectly colored, Journal of Applied Crystallography, vol.49, issue.5, pp.1786-1802, 2016.
DOI : 10.1107/s1600576716012942

M. F. Ashby, The deformation of plastically non-homogeneous materials, pp.399-424, 1970.

L. P. Kubin and A. Mortensen, Geometrically necessary dislocations and strain-gradient plasticity : a few critical issues, Scripta Materialia, vol.48, pp.119-125, 2003.
DOI : 10.1016/s1359-6462(02)00335-4

URL : https://infoscience.epfl.ch/record/90684/files/KubinLP-2003.pdf

M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe, Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD, Materials Science & Engineering A, vol.527, pp.2738-2746, 2010.
DOI : 10.1016/j.msea.2010.01.004

A. , ASTM E112-12, Standard Test Methods for Determining Average Grain Size, 2012.

C. A. Anderson and M. F. Hashler, Extension of electron microprobe techniques to biocemistry by the use of long wavelenght X-rays, Proceedings of the Fourth International Conference on X-ray Optics and Microanalysis, pp.310-327, 1966.

I. Barkshire, P. Karduck, W. P. Rehbach, and S. Richter, High-Spatial-Resolution Low-Energy Electron Beam X-Ray Microanalysis, Mikrochimica Acta, vol.132, pp.113-0128, 2000.

S. Vernier, J. Franchet, M. Lesne, T. Douillard, J. Silvent et al., iCHORD-SI combination as an alternative to EDS-EBSD coupling for the characterization of ?-?' nickel-based superalloy microstructures, Materials Characterization, vol.142, pp.492-503, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01822412

C. Langlois, T. Douillard, H. Yuan, N. P. Blanchard, A. Descamps-mandine et al., Crystal orientation mapping via ion channeling : An alternative to EBSD, Ultramicroscopy, vol.157, pp.65-72, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02066168

A. K. Singh, N. Louat, and K. Sadananda, Dislocation network formation and coherency loss around gamma-prime precipitates in a nickel-base superalloy, Metallurgical Transactions A, vol.19, issue.12, pp.2965-2973, 1988.

H. Hu, Texture of Metals, Texture, vol.1, issue.4, pp.233-258, 1974.

R. Radis, M. Schaffer, M. Albu, G. Kothleitner, P. Pölt et al., Multimodal size distributions of ?' precipitates during continuous cooling of UDIMET 720 Li, Acta Materialia, vol.57, issue.19, pp.5739-5747, 2009.

M. Ganesan, D. Dye, and P. D. Lee, A technique for characterizing microsegregation in multicomponent alloys and its application to single-crystal superalloy castings, Metallurgical and Materials Transactions A, vol.36, pp.2191-2204, 2005.

A. Seret, C. Moussa, M. Bernacki, and N. Bozzolo, On the Coupling between Recrystallization and Precipitation Following Hot Deformation in a ?-?' Nickel-Based Superalloy, Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol.49, issue.9, pp.4199-4213, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01817936

. Transvalor, Documentation FORGE R NxT

H. S. Valberg, Applied Metal Forming including FEM Analysis, 2010.

M. Jackson, R. J. Dashwood, L. Christodoulou, and H. M. Flower, Application of novel technique to examine thermomechanical processing of near beta alloy Ti-10V-2Fe-3Al, Materials Science and Technology, vol.16, issue.11-12, pp.1437-1444, 2000.

T. Altan, Cold And Hot Forging : Fundamentals And Applications, 2005.

D. Shahriari, M. H. Sadeghi, G. R. Ebrahimi, and K. T. Kim, Effects of lubricant and temperature on friction coefficient during hot forging of Nimonic 115 superalloy, Kovove Materialy, vol.49, issue.5, pp.375-383, 2011.

A. Baldan, Progress in Ostwald ripening theories and their applications to nickel-base superalloys. Part I : Ostwald ripening theories, Journal of Materials Science, vol.37, issue.11, pp.2171-2202, 2002.

K. Huang and R. E. Logé, A review of dynamic recrystallization phenomena in metallic materials, Materials and Design, vol.111, pp.548-574, 2016.

W. Cai and W. D. Nix, Imperfections in Crystalline Solids, 2016.

D. Hull and D. J. Bacon, , 2001.

D. K. Chaudhuri, D. Xie, and A. N. Lakshmanan, The influence of stacking fault energy on the wear resistance of nickel base alloys, Wear, vol.209, issue.1-2, pp.140-152, 1997.

P. C. Gallagher, The influence of alloying, temperature, and related effects on the stacking fault energy, Metallurgical Transactions, vol.1, issue.9, pp.2429-2461, 1970.

C. B. Carter and S. M. Holmes, The stacking-fault energy of nickel, Philosophical Magazine, vol.35, pp.1161-1172, 1977.

L. E. Murr, Interfacial phenomena in metals and alloys, 1975.

R. E. Schramm and R. P. Reed, Stacking fault energies of fcc fe-Ni alloys by x-ray diffraction line profile analysis, Metallurgical Transactions A, vol.7, issue.2, pp.359-363, 1976.

M. Charpagne, Evolutions de microstructure au cours du forgeage de l'alliage RENE 65, 2016.
URL : https://hal.archives-ouvertes.fr/tel-01764932

A. M. Wusatowska-sarnek, H. Miura, and T. Sakai, Nucleation and microtexture development under dynamic recrystallization of copper, Materials Science and Engineering A, vol.323, issue.1-2, pp.177-186, 2002.

H. Miura, T. Sakai, R. Mogawa, and J. J. Jonas, Nucleation of dynamic recrystallization and variant selection in copper bicrystals, Philosophical Magazine, vol.87, pp.4197-4209, 2007.

J. P. Sah, G. J. Richardson, and C. M. Sellars, Grain-Size Effects during Dynamic Recrystallization of Nickel, Metal Science, vol.8, issue.1, pp.325-331, 1974.

M. Zouari, N. Bozzolo, and R. E. Loge, Mean field modelling of dynamic and post-dynamic recrystallization during hot deformation of Inconel 718 in the absence of ? phase particles, Materials Science and Engineering A, vol.655, pp.408-424, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01297977

D. Li, Q. Guo, S. Guo, H. Peng, and Z. Wu, The microstructure evolution and nucleation mechanisms of dynamic recrystallization in hot-deformed Inconel 625 superalloy, Materials and Design, vol.32, issue.2, pp.696-705, 2011.

Y. Lin, X. Wu, X. Chen, J. Chen, D. Wen et al., EBSD study of a hot deformed nickel-based superalloy, Journal of Alloys and Compounds, vol.640, pp.101-113, 2015.

T. Sakai, A. Belyakov, and H. Miura, Ultrafine grain formation in ferritic stainless steel during severe plastic deformation, Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol.39, issue.9, pp.2206-2214, 2008.

F. Musin, A. Belyakov, R. Kaibyshev, Y. Motohashi, G. Itoh et al., Microstructure evolution in a cast 1421Al alloy during hot equal-channel angular extrusion, Reviews on Advanced Materials Science, vol.25, issue.2, pp.107-112, 2010.

N. Dudova, A. Belyakov, T. Sakai, and R. Kaibyshev, Dynamic recrystallization mechanisms operating in a Ni-20%Cr alloy under hot-to-warm working, Acta Materialia, vol.58, issue.10, pp.3624-3632, 2010.

K. Chen, J. Wu, H. Shi, X. Chen, Z. Shen et al., Transition of deformation behavior and its related microstructure evolution in Nimonic 80A under hot-towarm working, Materials Characterization, vol.106, pp.175-184, 2015.

H. Saka, T. Iwata, and T. Imura, Temperature dependence of the stacking-fault energy in pure silver, Structure, Defects and Mechanical Properties, vol.37, issue.2, pp.291-296, 1978.

L. Kovarik, R. R. Unocic, J. Li, P. Sarosi, C. Shen et al., Microtwinning and other shearing mechanisms at intermediate temperatures in Ni-based superalloys, Progress in Materials Science, vol.54, issue.6, pp.839-873, 2009.

R. W. Kozar, A. Suzuki, W. W. Milligan, J. J. Schirra, M. F. Savage et al., Strengthening mechanisms in polycrystalline multimodal nickel-base superalloys, Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol.40, issue.7, pp.1588-1603, 2009.

B. Reppich, Some new aspects concerning particle hardening mechanisms in ?' precipitating Ni-base alloys-I. Theoretical concept, Acta Metallurgica, vol.30, issue.1, pp.87-94, 1982.

A. Pineau and S. D. Antolovich, High temperature fatigue of nickel-base superalloys -A review with special emphasis on deformation modes and oxidation, Engineering Failure Analysis, vol.16, issue.8, pp.2668-2697, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00423793

B. Reppich, P. Schepp, and G. Wehner, Some new aspects concerning particle hardening mechanisms in ?' precipitating nickel-base alloys-II. Experiments, Acta Metallurgica, vol.30, issue.1, pp.95-104, 1982.

S. L. Semiatin, D. S. Weaver, R. C. Kramb, P. N. Fagin, M. G. Glavicic et al., Deformation and recrystallization behavior during hot working of a coarse-grain, nickel-base superalloy ingot material, Metallurgical and Materials Transactions A, vol.35, issue.2, pp.679-693, 2004.

J. V. Bee, A. R. Jones, and P. R. Howell, The interaction of recrystallizing interfaces with intragranular precipitate dispersions in a nickel-base superalloy, Journal of Materials Science, vol.16, issue.6, pp.1471-1476, 1981.

G. He, F. Liu, L. Huang, Z. Huang, and L. Jiang, Microstructure evolutions and nucleation mechanisms of dynamic recrystallization of a powder metallurgy Ni-based superalloy during hot compression, Materials Science and Engineering A, vol.677, pp.496-504, 2016.

M. A. Charpagne, P. Vennéguès, T. Billot, J. M. Franchet, and N. Bozzolo, Evidence of multimicrometric coherent ?' precipitates in a hot-forged ?-?' nickel-based superalloy, Journal of Microscopy, vol.263, issue.1, pp.106-112, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01354002

M. A. Charpagne, T. Billot, J. M. Franchet, and N. Bozzolo, Heteroepitaxial recrystallization : A new mechanism discovered in a polycrystalline ?-?' nickel based superalloy, Journal of Alloys and Compounds, vol.688, pp.685-694, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01353581

M. Charpagne, T. Billot, J. Franchet, and N. Bozzolo, Heteroepitaxial Recrystallization Observed in René 65 TM and Udimet 720 TM : a New Recrystallization Mechanism Possibly Occurring in All Low Lattice Mismatch ?-?' superalloys ?, pp.417-426, 2016.

D. J. Child, G. D. West, and R. C. Thomson, The use of combined three-dimensional electron backscatter diffraction and energy dispersive X-ray analysis to assess the characteristics of the gamma/gamma-prime microstructure in alloy 720Li TM, Ultramicroscopy, vol.114, pp.1-10, 2012.

S. Floreen and J. H. Westbrook, Grain boundary segregation and the grain size dependence of strengh of nickel-sulfur alloys, Acta Metallurgica, vol.17, pp.1175-1181, 1969.

C. T. Liu, C. L. White, and A. Horton, Effect of boron on grain-boundaries in Ni3Al, Acta Metallurgica, vol.33, issue.2, pp.213-229, 1985.

D. Tytko, P. Choi, J. Klöwer, A. Kostka, G. Inden et al., Microstructural evolution of a Ni-based superalloy (617B) at 700 degrees studied by electron microscopy and atom probe tomography, Acta Materialia, vol.60, pp.1731-1740, 2012.

P. Kontis, Z. Li, D. M. Collins, J. Cormier, D. Raabe et al., The effect of chromium and cobalt segregation at dislocations on nickel-based superalloys, Scripta Materialia, vol.145, pp.76-80, 2018.

P. Kontis, D. M. Collins, A. J. Wilkinson, R. C. Reed, D. Raabe et al., Microstructural degradation of polycrystalline superalloys from oxidized carbides and implications on crack initiation, Scripta Materialia, vol.147, pp.59-63, 2018.

M. J. Luton and C. M. Sellars, Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation, Acta Metallurgica, vol.17, issue.8, pp.1033-1043, 1969.

S. Mahajan and D. F. Williams, Deformation Twinning in Metals and Alloys, International Metallurgical Reviews, vol.18, issue.2, pp.43-61, 1973.

M. S. Szczerba, T. Bajor, and T. Tokarski, Is there a critical resolved shear stress for twinning in face-centred cubic crystals ?, Philosophical Magazine, vol.84, issue.3-5, pp.481-502, 2004.

J. V. Bee, A. R. Jones, and P. R. Howell, The development of the "necklace" structure in a powder-produced nickel-base superalloy, Journal of Materials Science, vol.15, issue.2, pp.337-344, 1980.

T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, and J. J. Jonas, Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions, Progress in Materials Science, vol.60, issue.1, pp.130-207, 2014.
DOI : 10.1016/j.pmatsci.2013.09.002

URL : https://doi.org/10.1016/j.pmatsci.2013.09.002

T. M. Maccagno and J. J. Jonas, Correcting for the Effects of Static and Metadynamic Recrystallization during the Laboratory Simulation of Rod Rolling, ISI, vol.34, issue.7, pp.607-614, 1994.

M. Zouari, R. Logé, and N. Bozzolo, Situ Characterization of Inconel 718 Post-Dynamic Recrystallization within a Scanning Electron Microscope, vol.7, p.476, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01630159

Z. Xu, G. Zhang, and T. Sakai, Effect of carbon on static restoration of hot worked plain carbon steels, ISIJ International, vol.35, issue.2, pp.210-216, 1995.

X. Yang, H. Miura, and T. Sakai, Isochronal Annealing Behavior of Magnesium Alloy AZ31 after Hot Deformation, Materials Transactions, vol.46, issue.12, pp.2981-2987, 2005.

A. Belyakov, T. Sakai, H. Miura, R. Kaibyshev, and K. Tsuzaki, Continuous recrystallization in austenitic stainless steel after large strain deformation, Acta Materialia, vol.50, issue.6, pp.1547-1557, 2002.

A. Takayama, X. Yang, H. Miura, and T. Sakai, Continuous static recrystallization in ultrafinegrained copper processed by multi-directional forging, Materials Science and Engineering A, vol.478, issue.1-2, pp.221-228, 2008.

Y. Jin, B. Lin, M. Bernacki, G. S. Rohrer, A. D. Rollett et al., Annealing twin development during recrystallization and grain growth in pure nickel, Materials Science and Engineering A, vol.597, pp.295-303, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00945387

B. Lin, Y. Jin, C. M. Hefferan, S. F. Li, J. Lind et al., Observation of annealing twin nucleation at triple lines in nickel during grain growth, Acta Materialia, vol.99, pp.63-68, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01186079

A. Gibot,

A. C. Leff and M. L. Taheri, Quantitative assessment of the driving force for twin formation utilizing Nye tensor dislocation density mapping, Scripta Materialia, vol.121, pp.14-17, 2016.

G. Gottstein, Annealing texture development by multiple twinning in f.c.c. crystals, Acta Metallurgica, vol.32, issue.7, pp.1117-1138, 1984.

M. Perez, Gibbs-Thomson effects in phase transformations, Scripta Materialia, vol.52, pp.709-712, 2005.
URL : https://hal.archives-ouvertes.fr/hal-01540128

R. D. Doherty, Role of interfaces in kinetics of internal shape changes, Metal Science, vol.16, pp.1-13, 1982.

A. Porter and B. Ralph, The recrystallization of nickel-base superalloys, Journal of Materials Science, vol.16, issue.3, pp.707-713, 1981.

P. R. Howell and J. V. Bee, The interaction of recrystallising interfaces with a dispersion of ?' in low carbon Astroloy, First Risø International Symposium on Metallurgy and Materials Science, pp.171-176, 1980.

R. W. Cahn and P. Haasen, Physical Metallurgy, 1996.

V. Randle and B. Ralph, Interactions of grain boundaries with coherent precipitates during grain growth, Acta Metallurgica, vol.34, issue.5, pp.891-898, 1986.

D. Shahriari, M. H. Sadeghi, A. Akbarzadeh, and M. Cheraghzadeh, The influence of heat treatment and hot deformation conditions on ?' precipitate dissolution of Nimonic 115 superalloy, The International Journal of Advanced Manufacturing Technology, vol.45, pp.841-850, 2009.

A. Agnoli, M. Bernacki, R. Logé, J. M. Franchet, J. Laigo et al., Selective Growth of Low Stored Energy Grains During ? Sub-solvus Annealing in the Inconel 718 Nickel-Based Superalloy, Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science, vol.46, issue.9, pp.4405-4421, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01182884

M. A. Charpagne, J. M. Franchet, and N. Bozzolo, Overgrown grains appearing during subsolvus heat treatment in a polycrystalline ?-?' Nickel-based superalloy, Materials and Design, vol.144, pp.353-360, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01719248

A. J. , Interfacial free energies and solute diffusivities from data on Ostwald ripening, Interface Science, vol.3, issue.2, pp.119-125, 1995.

S. J. Yeom, D. Y. Yoon, and M. F. Henry, The Morphological Changes of ?' Precipitates in a Ni-8Al (Wt Pct) Alloy during Their Coarsening, Metallurgical and Materials Transactions A, vol.24, pp.1975-1981, 1993.

T. Miyazaki, H. Imamura, and T. Kozakai, The formation of "?' precipitate doublets" in NiAl alloys and their energetic stability, Materials Science and Engineering, vol.54, issue.1, pp.9-15, 1982.

M. Doi, T. Miyazaki, and T. Wakatsuki, The effect of elastic interaction energy on the morphology of ?' precipitates in nickel-based alloys, Materials Science and Engineering, vol.67, issue.2, pp.247-253, 1984.

G. S. Rohrer, Grain boundary energy anisotropy : a review, Journal of Materials Science, vol.46, pp.5881-5895, 2011.
DOI : 10.1007/s10853-011-5677-3

URL : https://link.springer.com/content/pdf/10.1007%2Fs10853-011-5677-3.pdf

A. Morawiec, Misorientation Angle and Axis Distributions, Orientations and Rotations, pp.115-127, 2004.
DOI : 10.1007/978-3-662-09156-2_7

B. B. Straumal, S. A. Polyakov, E. Bischoff, W. Gust, and E. J. Mittemeijer, Faceting of ?3 and ?9 Grain Boundaries in Copper, Interface Science, vol.9, pp.287-292, 2001.

B. B. Straumal, O. A. Kogtenkova, A. S. Gornakova, V. G. Sursaeva, and B. Baretzky, Review : grain boundary faceting-roughening phenomena, Journal of Materials Science, vol.51, issue.1, pp.382-404, 2015.
DOI : 10.1007/s10853-015-9341-1

H. Grimmer, W. Bollmann, and D. H. Warrington, Coincidence-site lattices and complete pattern-shift in cubic crystals, Acta Crystallographica Section A, vol.30, pp.197-207, 1974.
DOI : 10.1107/s056773947400043x

URL : http://journals.iucr.org/a/issues/1974/02/00/a10612/a10612.pdf

B. Lindsley and X. Pierron, Sub-solvus recrystallization mechanisms in UDIMET R alloy 720LI, pp.59-68, 2000.
DOI : 10.7449/2000/superalloys_2000_59_68

D. Barba, T. M. Smith, J. Miao, M. J. Mills, and R. C. Reed, Segregation-Assisted Plasticity in Ni-Based Superalloys, Metallurgical and Materials Transactions A, vol.49, pp.4173-4185, 2018.
DOI : 10.1007/s11661-018-4567-6

URL : https://link.springer.com/content/pdf/10.1007%2Fs11661-018-4567-6.pdf